Thermal All-in-One 125mm Ducting Cutting Aid

Thermal All-in-One (DTD) Ducting Ancillaries Range 

Domus Thermal All-in-One Solution (DTD) is an insulated ducting solution, manufactured from graphite polystyrene. Lightweight and airtight due to a unique clip system, DTD is easy to install and requires no sealant or tape.

When cutting ducting a flush, sqaure 90 cut is required to ensure than an air tight seal is made with centre ridge in the clamp. If an angled cut is made, this will not allow duct clamps to create a seal on the duct. We advise that the duct is cut with a very sharp blade or fine toothed saw (we recommend a minimum of 14 teeth per inch). The cutting blade length should be at least the same length as the thickness of the ducting.

Manufactured in South Wales and Aylesford, our two production facilities ensure consistent availability through merchant and electrical wholesalers. Our award winning ducting systems ensure precise fit and maximum performance, reducing installation time and costs. At Domus we are committed to meeting Building Regulations and emerging environmental standards, Domus Ventilation continues to lead the market with cutting-edge solutions.

• Size and Code: 125mm (DTD-125-CUTTINGAID)

Available in select sizes