Thermal All-in-One Duct Black Insert 220x90mm

Thermal All-in-One (DTD) Ducting Ancillaries Range 

We advise that the duct is cut with a vry sharp blade or fine toothed saw (we recommend a minimum of 14 teeth per inch). The cutting blade length should be at least the same length as the thickness of the ducting. The centre joint of the duct should be located on the centre flange of the clamp. Ensure the ducting is fully pressed into the clamp to create and airtight seal. Failing to do so may cause air leakage.

Manufactured in South Wales and Aylesford, our two production facilities ensure consistent availability through merchant and electrical wholesalers. Our award winning ducting systems ensure precise fit and maximum performance, reducing installation time and costs. At Domus we are committed to meeting Building Regulations and emerging environmental standards, Domus Ventilation continues to lead the market with cutting-edge solutions.

• Size and Code: 220mmx90mm (DTD-220-INS)

Available in select sizes